Search
4/8/16E1+4 100M ETH SNMP Managed PDH
SNMP Management

1. Overview               

FB500 is designed as a modular system with two 155Mb/s optical interfaces to provide an ultra-compact, cost-effective and flexible multi-service platform. With optional cards such as E1 card and Ethernet card, it is easy to meet user’s various requirements. It can realize the 4/8/16E1 and 100Mbps Ethernet transmission over optical line.

 

With low power consumption, high integration and well stability, FB500 can be used to build point-to-point network; it is a cost-competitive solution for the application such as the telecommunication, the electric power and the finance fields.

 

2. Feature  

Standard rack with 1U height and 19 Inch width

 

Optical Interface

    ---> Two 155Mb/s optical interfaces, LC type SFP module, hot pluggable

    ---> Provides optical line 1+1 protection with switching time less than 50ms

    ---> Supports RPD (Remote Power down Detection) information sending function

   ---> Supports ALS (Automatic Leaser Shutdown) to protect operators from hurt

    ---> Local equipment supports optical line loop and device loop, remote equipment supports optical line loop

 

E1 Interface

    ---> Provides 4/8/16 E1 interfaces

    ---> Optional 120Ω balanced E1 interface / 75Ω unbalanced E1 interface

    ---> E1 interface, Jitter tolerance and jitter generation fully comply with ITU-T G.703, G.823 recommendations.

    ---> Supports E1 device loop and E1 line loop for easy testing.

 

Ethernet Interface

    ---> Provides 4 copper fast Ethernet interfaces

    ---> Four Ethernet ports share 100Mbps

    ---> Supports auto-negotiation, it can also be set to 10M full/half-duplex, 100M full/half-duplex mode by force

    ---> Accepts frames with length between 64 and 1518/1916 bytes (otherwise filtering).

    ---> VLAN function based on tags compliant to IEEE 802.1Q.

    ---> Up to 16 VLAN entries

    ---> Supports MAC address dynamic learning

    ---> Auto MDI/MDX function.

    ---> Supports Link Fault Pass Through function

    ---> Throughout statistic of the Ethernet packets based on port

    ---> Supports flow control and broadcast storm filtering control.

    ---> Supports port rate control.

 

Equipment timing mode

    ---> Tracing from local timing

    ---> Tracing from Optical line

    ---> Tracing from E1 line

 

Supports embedded BERT for troubleshooting

 

Management

     ---> Provides serial management interface(CONSOLE) and Ethernet management interface (EMU),

            both adopt RJ45 connector

    ---> Supports local management based on CLI command via CONSOLE interface or Telnet login

    ---> Supports local management based on WEB Browser login via local management interface (EMU)

    ---> Supports SmartView network management platform based on SNMP_V1 and SNMP_V2 protocol

           to perform excellent management

    --->  Supports firmware update online by remote control

 

3.Typical Application

FB500 can be used to build point-to-point network, the four Ethernet ports share 100Mb/s, as the following figure shows:

 

4.Order Information 

FB500-120-S022LAD : 4E1+4 10/100M Ethernet Ports over 2 Fibers PDH Optical Mux,1+1 Optical Ports backup, Single Mode 20km SFP Module LC Connector, SNMP Management, 220VAC+ -48DC Dual Power Supply Redundancy, 1U 19"Size Rackable Unit

 

FB500-240-S022LAD : 8E1+4 10/100M Ethernet Ports over 2 Fibers PDH Optical Mux,1+1 Optical Ports backup, Single Mode 20km SFP Module LC Connector, SNMP Management, 220VAC+ -48DC Dual Power Supply Redundancy, 1U 19"Size Rackable Unit

 

FB500-480-S022LAD : 16E1+4 10/100M Ethernet Ports over 2 Fibers PDH Optical Mux,1+1 Optical Ports backup, Single Mode 20km SFP Module LC Connector, SNMP Management, 220VAC+ -48DC Dual Power Supply Redundancy, 1U 19"Size Rackable Unit

 

 

 

Product Search